KEF LS50 Wireless II
แบรนด์: KEF
99,000 ฿
LS50 Wireless II: Uni-Q Point SourceLS50 Wireless II is built around KEF's Uni-Q driver array - HF 25 mm (1 in.) vented aluminium dome with MAT, LF 130 mm (5.25 in.) aluminium cone (per speaker). Placing the tweeter in the acoustic centre of the cone makes the pair behave as a single point source, so the sweet spot widens and the tonal balance holds up wherever you sit.
LS50 Wireless II is an active design, which means each driver has its own amplifier and its own DSP-defined crossover. There is no passive crossover between amplifier and driver to lose control or waste power.
LS50 Wireless II is an active design, which means each driver has its own amplifier and its own DSP-defined crossover. There is no passive crossover between amplifier and driver to lose control or waste power.
LS50 Wireless II: AmplificationLS50 Wireless II amplifies every driver individually: LF Class D, HF Class AB (per speaker). Maximum SPL 108 dB at 1 m. Because the amplifier is matched to the driver it is driving, the system knows exactly what the cone is doing and can protect it near its limits instead of guessing.
LS50 Wireless II covers 45 Hz - 28 kHz (+/-3dB) measured at 85dB/1m. Frequency range 40 Hz - 47 kHz (-6dB), so the response is defined by DSP rather than by cabinet compromises - and it can be reshaped for placement close to a wall or on a stand.
LS50 Wireless II covers 45 Hz - 28 kHz (+/-3dB) measured at 85dB/1m. Frequency range 40 Hz - 47 kHz (-6dB), so the response is defined by DSP rather than by cabinet compromises - and it can be reshaped for placement close to a wall or on a stand.
LS50 Wireless II: ConnectionsLS50 Wireless II accepts Primary speaker: HDMI eARC, TOSLINK optical, digital coaxial, analog 3.5 mm auxiliary, RJ45 Ethernet (network and interspeaker), USB Type A (service).
LS50 Wireless II also provides RCA subwoofer output, so a KEF KUBE or KC subwoofer can extend the low end when the room asks for it. LS50 Wireless II measures H 305 x W 200 x D 311 mm per speaker and weighs 20.1 kg (44.3 lbs) per set.
LS50 Wireless II also provides RCA subwoofer output, so a KEF KUBE or KC subwoofer can extend the low end when the room asks for it. LS50 Wireless II measures H 305 x W 200 x D 311 mm per speaker and weighs 20.1 kg (44.3 lbs) per set.
LS50 Wireless II: Streaming and ControlLS50 Wireless II supports AirPlay 2, Google Cast, Roon Ready, UPnP, Bluetooth 5.0. Spotify Connect, Tidal Connect, Amazon Music, Qobuz, Deezer. Interspeaker link resampled to 96kHz/24bit wireless or 192kHz/24bit wired.
Everything is set up and controlled from the KEF Connect app - source selection, EQ for placement, multiroom grouping and firmware updates - so LS50 Wireless II needs no separate amplifier, streamer or DAC in the rack.
Everything is set up and controlled from the KEF Connect app - source selection, EQ for placement, multiroom grouping and firmware updates - so LS50 Wireless II needs no separate amplifier, streamer or DAC in the rack.
